Picked up this bike recently. A great old bike in great shape, except the motor. The motor has been torn down to fix some leaks. Once it’s back together the bike will be a lot of fun. Unfortunately I dropped a piece of the cam chain guide down into the bottom end, so the bike will need to be flipped and shaken a bit before everything can be put back together. Should be a good runner once it’s back on it’s feet.
Picked up this bike for a super deal. When I got it it was completely disassembled and in boxes. In this shot it’s partially back together. As it stands right now it’s completely back together and running awesome. Needs some visual updates and some larger steering head bearings but a fun little bike.
Wow. Haven’t kept up on this site much lately. The bike business has been slowing down lately due to an alternate full time job and graduate school, but I still do what I can.
Toured to the east coast on this XJ700 then sold it shortly after. Great little bike. I had it running like brand new.
I worked at the BeemerBalancers.com vendor booth up at the BMW Motorcycle Rally in Essex Junction VT. The rally brought in about 12,000 BMW riders and enthusiasts and a whole lot of business and product awareness to BeemerBalancers.com. The show was a lot of fun and a big success.
This coming weekend is the Vintage Motorcycle Days rally at the Mid-Ohio race track. I am planning on going to this as well, but not as part of a vendor. I look forward to the swap meet, which is supposedly the biggest motorcycle swap meet in the world.
Rolled this XJ700 into the shop today. Has been sitting a while and doesn’t run, but it’ll be going good within 24 hours. 21,000 on the clock. A nice solid bike to work on.
BeemerBalancers.com is selling a cool little keychain. Its styled after a BMW but should fill the need for any motorcyclist. It doubles as a bottle opener. It will be on their site tomorrow for $10.95 with free shipping. There will of course be a better picture of it there. You can probably get them though me too if you’d like, but BeemerBalancers.com will be easier for everyone.
Yamaha used about 15 miles of excess unneeded cable when it built the xs11’s in the factory. On the left you can see all the stock wiring which I pulled into the open and cut the sheaths off of. After half a day of determining which wires I actually needed to run the bike I ended up with the picture on the right. Just a few lone wires neatly tucked alongside the frame rails.
The wiring that exists basically connects the battery, ignition system, ballast resistor, coils and regulator. Besides that every electronic component on the bike was removed. I still need to run a couple wires for the headlight and tail light, but they will be on their own seperate fused circuit so it is independent of the bikes other electrical. It was a lot of work, but it turned out great. One step at a time this bike is making a major transition.
Today I began work on the 79 xs1100 that I’m going to bob out. I cut off the rear of the bike. Created mounts for a brake light under the rear caliper and a license plate over the rear shock. Swapped the pegs with an ’80 model because they are larger. Removed passenger pegs and mounts. Removed gauges. KZ550 headlight. Kickstart from the TX500.
I have to order a small solo seat (the one that’s on there is just a quick one I built for testing purposes), some exhaust wrap, low bend bars, and new pod filters. Then some cleaning, re-paint and fresh rubber. This bike is going to be fire. And WOW is it fast.
After debating for a while on rebuilding the motor or parting the TX500 out, I decided to part it. I had already purchased a new cylinder and pistons for it, but the cam chain and gaskets were tough to come by so instead of waiting around I just ripped it apart. If you need any 73 TX5 parts you can find them all on my ebay page: http://motors.search.ebay.com/_W0QQsassZentercow